Rainwater Harvesting and Greywater Recycling
Rainwater harvesting can be part of a larger system that includes greywater recycling, but they are not the same thing. Greywater is a term that is defined by what it is not, meaning greywater is all forms of non-toilet household wastewater. This includes wastewater from kitchen and bathroom sinks, showers and baths, washing machines and dishwashers. It contains fewer disease-causing organisms or pathogens than toilet water, so it is easier to recycle for reuse.
Greywater can be recycled in a home, apartment building, office or hotel, and can be used to flush toilets (hereafter referred to as blackwater), irrigate a garden or lawn, or water crops. Greywater reuse is often intended to further reuse the water collected in a rainwater harvesting system so that it can be used multiple times. For example,
The mechanical method of wastewater treatment separates undissolved mineral and organic compounds in wastewater. In mechanical treatment of industrial wastewater, one of the physicochemical, chemical, biological and thermal methods is used to achieve a high level of water purification. Mechanical treatment ensures up to 90-95% removal of suspended solids in wastewater and a reduction in organic pollutants by 20-25% (total KBBE). Such processes as filtration, filtration and centrifugation are used in wastewater treatment using screens of different diameters. The volume of water treatment facilities and their type mainly depend on the amount, composition and properties of wastewater, as well as the processes of further water purification. For complete filtration of
collected rainwater can be filtered and stored, first used in the shower or washing machine, and then the grey water generated by these activities can be collected and used in landscaping.
wastewater, mesh drum filters or microfilters and high-pressure filters, polyurethane foam or foam plastic floating filters are used. In this case, wastewater is purified without the use of chemicals. The choice of a method for cleaning wastewater from suspended particles is made taking into account the kinetics of the process. The size of suspended particles in industrial wastewater can be very large (particle diameter from 5+1 O'9 to 5+1 O'4 m). For particles up to 10 µm in size, the final sedimentation velocity is less than 10'2 cm/s. If the particles are large (diameter 30-50 µm or more), then according to Stokes' law they settle (random sedimentation - under the action of gravity) or float. It should be noted that if the concentration of impurities in water is high, it settles, if the concentration is low, it is filtered.
Before the flotation method can effectively clean industrial wastewater,Overflow of channels and pipelines, as well as sewerage It is used to separate large impurities.When implementing this process, usually from nets or sieves is used. Screens are divided into mobile, stationary, and also suspended with grinders. Metal bars made of a pipe and in the direction of movement of wastewater It is installed at an angle of 60-75 °. Round pipes low resistance, but quickly becomes dirty, therefore a rectangular tube is often used. Bars cleans wastewater using various types of filters

The width of the gap in the bars is 16-19 mm, between the tubes the speed of movement of wastewater is assumed to be 0.8-1 m/s. The pressure lost in the bars (hp) is given by the following formula found:
